The first place to start when moving over to tubeless. Long-lasting tape that fits a variety of rim sizes, in the classic Muc-Off pink. 

The Muc-Off Tubeless Rim tape is made from their own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m and 50m workshop roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

FEATURES

• The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole 

• Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF

• Comes with four seal patches, so you’re never caught short

• Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims

• Extreme strength and durability

• Pressure-sensitive adhesive ensures the ultimate air-tight seal

• Engineered to stretch to fit perfectly in the contour of your rim

• Comes as 10m roll - allowing for 4 applications

HOW TO USE

• First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup

• Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)

• Locate the valve hole

• Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole

• With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself

• Rotate the wheel around as you continue to apply the tape

• Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms

• Cut the tape at a 45 degree angle and press the edge down

• Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any

• Apply the finishing patch over the edge of the tape to ensure a firm seal

• Push the valve through the rim hole and secure with the 'O' ring and locking ring

• Refit the tyre and inflate - you're now ready to add your sealant!